製品の電源が入らない | Bose TV Speaker

If the remote sensor on the speaker is in a very bright area or is blocked by an object, the interference will affect the ability of the speaker to receive commands from its IR remote control. Remove any obstructions in front of the speaker and if it is in excessive light, try reducing it.

リモコンが正常に動作するための十分な電力がバッテリーにない可能性があります。

コインを使ってリモコン背面の電池カバーを外してください。新しいCR2032（またはDL2032）電池に交換します。電池はプラス（+）面を電池室の外側に向けてセットし、電池カバーを再度取り付けて時計回りに回して固定してください。

新しい電池と使用済みの電池は、必ず子どもの手の届かない場所に保管してください。

When using an HDMI connection between two devices, Consumer Electronics Control (CEC) functionality allows the devices to communicate and send control commands between them. Enabling this feature on your TV will allow its remote control – or possibly a remote control of another device connected to the TV with an HDMI cable – to change the volume level of your Bose TV Speaker.

CEC implementation and capabilities vary among different brands, which can cause various control issues. Depending on the brand, HDMI-CEC functionality may be labelled differently in the settings menu of the TV. For more info, see Names used by different brands for CEC.

If your TV, cable box, or satellite box is operated by a universal remote control, refer to its instructions to determine if it can be programmed to operate a Bose product. Try all of the Bose codes listed in the universal remote control instruction booklet. If no Bose codes are listed or no code could be found to operate the system then the universal remote is incompatible.

Bose has made the necessary IR control information available to universal remote control manufacturers in order for them to incorporate the ability to control our systems. Due to the fact that manufacturers' implementation of our IR control information is different for each universal remote, we are not able to provide a code to enter into the universal remote. For example, one manufacturer can assign our IR control information to code 2345 for their remote while another manufacturer can assign the same IR control info to code 6789. Bose is not provided with any codes from universal remote manufacturers that use our IR control information.

Be sure the power connections are secure at the power outlet and to the back of the TV Speaker. When facing the front of the speaker, the power cord is the left-most connection into the back of the speaker.

コンセントが壁のスイッチで操作されている場合は、必ずスイッチが入っていることを確認してください。ランプなどの他の電子機器を接続して、コンセントが正常に動作するかどうかも確かめられます。電源タップ（またはサージプロテクター）に接続している場合は、電源タップを使わずに電源コードを直接壁のコンセントに差し込んでみてください。