製品の音声が断続的になる | Bose SoundLink Plus Portable Speaker
bose-soundlink-plus-portable-speaker
Bose SoundLink Plus Portable Speaker販売元 2025

製品の音声が断続的になる | Bose SoundLink Plus Portable Speaker

製品をお客様ご自身のデバイス(スマートフォンやタブレットなど)から33フィート(10メートル)以内に保ってください。

距離や壁、ドア、その他の電子機器などの障害物によって、Bluetooth信号が弱くなることがあります。問題が発生している場合は、ご使用のデバイスと製品を近づけるか、干渉の原因となる他の機器を移動してみてください。

Try different media, apps, or devices.

Play audio from a different app, media source, or personal device (such as a phone, tablet, or computer) to determine if the issue is related to a specific source. If the issue is with a particular source or device, check its settings.

製品をリセットしてください。

リセットを行うと、スピーカーの内部設定がリフレッシュされ、軽微な問題の解決に役立つ場合があります。

  1. 電源 \"icon\" ボタンを 15秒間長押ししてください。
  2. スピーカーの電源が切れ、自動的に再度オンになります。

以前に接続した機器は削除されません。

ご自身のデバイスを再起動してください。

一時的なBluetoothやオーディオの問題を解決するには、デバイス(スマートフォン、タブレット、またはコンピューター)の電源を30秒間オフにし、その後オンにしてください。

製品のアップデートが利用可能か確認し、あればインストールしてください

ご使用中の製品にどのような問題が発生している場合でも、まずは製品のアップデートをお試しください。次のウェブサイトにアクセスし、 btu.Bose.com の指示に従って、最新の機能や改善がご利用いただけることをご確認ください。

Clear and re-pair your speaker.

If there’s an issue with the device memory, clearing the pairing list may help. To do this:

  1. Remove your speaker from the paired devices on your phone, tablet, or computer.
  2. Press and hold the Bluetooth button \"icon\" until you hear \"Bluetooth device list cleared.\"
  3. Select your speaker from the available devices and tap Pair or Connect.

Factory restore your speaker.

Restoring to factory settings can resolve persistent issues. To restore your speaker to its original settings:

  1. Press and hold both the – and + buttons at the same time for 15 seconds.
  2. Wait until the power light blinks white for 3 seconds.

Important: This will erase all settings and return your speaker to its factory state. You will need to remove the speaker from your personal device's (phone, tablet, or computer) Bluetooth list and reconnect it.

これは役に立ちましたか?

YES
NO
修理または交換を開始する