これは役に立ちましたか?
マイクが不明瞭な音を拾う | SoundComm™ B40 headset
Be sure the radio is within range of its base station.
The wireless radio connected to the headset might be out of range of its base station. This can cause interference, poor or intermittent microphone or headphones. Try moving the radio closer to its base station.
Turn off the Acoustic Noise Reduction.
In high-noise environments or when speaking too loudly into the microphone, sound passing through the microphone can become distorted since the signal is also boosted by the active electronics in the headset
Turn off the power switch to disable ANR and use the headset passively. If the issue is resolved, use the headset passively until volume levels near the microphone are reduced
Turn off the power switch to disable ANR and use the headset passively. If the issue is resolved, use the headset passively until volume levels near the microphone are reduced
別のヘッドホンを接続してください。
別のヘッドホンをオーディオ機器に接続して、問題が機器本体や設定にあるかどうかを確認してください。
Check to see if the sidetone can be heard clearly.
If there is no problem hearing the sidetone then the issue is not with the headset. Check the radio settings
.png)
