Setting ADAPTiQ A/B | Lifestyle® T10 home theater system
lifestyle®-t10-home-theater-system
Lifestyle® T10 home theater system販売元 2010 - 2012

Setting ADAPTiQ A/B | Lifestyle® T10 home theater system

To toggle ADAPTiQ functionality, follow these steps:

  1. Verify that the console software is 01.06.00 or greater, the remote software is 01.04.00 or greater and that ADAPTiQ has been run. For information, see Checking the software or firmware version
  2. On the remote, press and hold both the Menu and Exit buttons at the same time for 5 seconds. Once this has been done, ADAPTiQ will change to the opposite state
There will not be any tone, LED blink pattern or on-screen message to indicate the change. Also, the ADAPTiQ - Enable/disable selection within the Setup menu will not properly indicate whether the feature is enabled or disabled. Only selecting "Yes" when asked to enable or disable the feature will correctly indicate whether ADAPTiQ is on or off.

これは役に立ちましたか?

YES
NO
修理または交換を開始する